©SCHWEINERT.COM
logo

Tag : pa-cf

12 Jan 2021
brittle pa-cf parts

Properly hydrate Nylon/PA-CF parts

In some cases you have to hydrate your Nylon PA-CF 3D printed parts or they will be too brittle and break upon assembly. Big companies like Molex are doing the same with their nylon electronic connector parts. They moisturize them to avoid breakage. Also since it is inevitable that the nylon part will absorb moisture over time and that changes in dimensions and physical properties will occur, it is frequently desirable to actively moisturize them so that these changes occur […]

09 Jan 2021
esun pa-cf mk3 extruder part

My recipe for 3D printing with eSUN PA-CF

I am by no means an expert in printing with nylon filaments but I gathered as much information as possible from various forums, facebook groups, instagram etc. where people posted photos of amazing high quality prints with carbon nylon filament. To tell you right away: you have to dry your nylon filament first, no matter if it’s fresh out of a vaccum bag – it’s just a waste of time and material. Of course I didn’t believe it myself until […]