Archive for Tag: 3d printer

Silicone Bed Level Mod Prusa MK3

2021-01-17
do it yourself

On my original Prusa MK3 I had a bed variance of 0.6mm across the whole bed. The integrated 7×7 mesh bed leveling did work but I always found that the bed needs to be as flat as possible in the beginning. So I did the famous “Nylock Mod” some time ago. It was very good […]

Sorbothane feet for 3D Printer

2021-01-16
do it yourself

I always wanted to do this mod using sorbothane feet on my Prusa MK3 but I didn’t found them here in europe – until now 🙂 After searching the obvious sources like amazon, ebay, etc. I couldn’t find them in the correct diameter or hardness and for a reasonable price. But I finally found a […]

AirManagerV2 for 3D Printing enclosure

2020-01-13
do it yourself

After I saw the video from Zortrax about their HEPA Cover Filtering Device (watch video below) I think “for me” a HEPA and active carbon filter is plenty sufficient for keeping the air clean in my 3d printing enclosure. Certainly better than nothing. But I’ve designed it with a radial blower and in such a […]

Perfect 3D printer enclosure for PRUSA i3 MK3

2018-11-07
do it yourself

I’ve found the perfect enclosure for my Prusa i3 MK3 3D printer (no modification needed!). It’s a cheap server wall mount cabinet for only 79,- EUR. You can find it on ebay or in different computer online shops. It has 4 mm safety glass and powder coated sheet metal walls. The roof and bottom have […]